English-19
OPERATION
Plug & Play Feature
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER button
on the remote control.
The message
“Menu language, Channels
and
Time will be set.”
is displayed
. Press the
ENTER button, then
“Select the language of the
OSD” menu is automatically
displayed.
2
Press the ENTER button
to enter the language.
Press the
UP/DOWN
buttons to select language,
then the ENTER button.
“Select the antennas to
memorize.” menu is
automatically displayed.
3
Press the UP/DOWN
buttons to memorize the
channels of the selected
connection.
Press the
ENTER button
to select “Start”.
• If the antenna is connected
to ANT 1(CABLE),
select “CABLE” and if it is
connected to ANT 2
(AIR), select “AIR”.
• If both ANT 1 and ANT 2
are connected, select
the “Air + Cable”.
• If the CableCARD is
inserted into the
“CableCARD” slot on the
rear panel, “Cable” and
“Air+Cable” are not
available.
01 BN68-00929A-00Eng.qxd 6/8/05 8:21 AM Page 19
