
: You can connect to a mobile device without an access point through the ‘Samsung Wireless LAN Adapter’ by
using a peer to peer network.
Choose , then a device list is displayed.
While in the device list, press the Blue button on the remote or select
.
The message
is
displayed.
Input the generated and into the
device you want to connect.
N
Choose , the device list is displayed.
Select the device you want in the Device list.
If security key was applied, input the security key again.
If network doesn’t operate normally, please check the
and again. If the is incorrect,
it may be the reason for the malfunction.
N
If you want to connect AP, AP should support DHCP. Only devices which support mode
can be connected without DHCP.
Set to .
Select .
Set to .
The Internet Protocol is set automatically.
Select a network through .
Select to check the network connectivity.
Set to .
Select .
Set to .
Set up and .
Press the number buttons on the remote control when you set the Network manually.
Select a network through .
Select to check the network connectivity.
N
N
InternetProtocolSetup :Auto ▶
NetworkTest
Selectanetwork :AP1
U
Move
E
Enter
R
Return
WirelessNetworkSetup
IPAddress :
SubnetMask :
Gateway :
DNSServer :
InternetProtocolSetup :Manual ▶
NetworkTest
Selectanetwork :AP1
U
Move
E
Enter
R
Return
WirelessNetworkSetup
IPAddress :
0
0
0
0
SubnetMask :
0
0
0
0
Gateway :
0
0
0
0
DNSServer :
0
0
0
0
Theexistingnetworksystemmayhavelimited
functionality.Doyouwanttochangethenetwork
connection?
Yes No
BN68-01900F-01Eng.indb 31 2009-04-07 �� 3:59:10