
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
is supported in TV, AV, COMPONENT(480i / 1080i) and HDMI(480i / 1080i).
: Turn the Film Mode function off.
: Automatically adjusts the picture for the best quality when watching a film.
: Automatically optimizes the video text on the screen (not including closed captions) when watching a film.
Removes drag from fast scenes with a lot of movement to provide a clearer picture.
If you enable , noise may appear on the screen. If this occurs, set to .
: Switches 100Hz Motion Plus off.
: Sets 100Hz Motion Plus to minimum.
: Sets 100Hz Motion Plus to medium.
: Sets 100Hz Motion Plus to maximum.
: Adjusts the blur and judder reduction level to suit your preference.
: Adjusts the blur reduction level from video sources.
: Adjusts the judder reduction level from video sources when playing films.
: Reset the custom settings.
: Displays the difference between 100Hz Motion Plus on and off modes.
This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green
signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Colour and Tint of video equipment such
as DVD players, Home Theatres, etc. Using this function, you can adjust the Colour and Tint to preferred values appropriate to
the signal level of each video device using the Red / Green / Blue / Cyan / Magenta / Yellow Colour Bar Patterns, without using an
additional Blue Filter.
is available when the picture mode is set to or .
Resets all picture settings to the default values.
: Current picture values return to default settings.
■
N
●
●
●
■
N
●
●
●
●
●
●
■
N
❑
N
BN68-01900F-01Eng.indb 17 2009-04-07 �� 3:59:06