@ Setting Up
"44&.#-&5)&'3&&;&3%3"8&3
2. Hang the freezer door front onto open slots on the sides.
3. Tighten four 10mm hex-head screws completely.
CAUTION
Make sure the door is well assembled on the rail
4. With the drawer pulled out fully, insert the lower basket (
6
) into
the rail system.
CAUTION
If the drawer is not properly assembled on the rail, the door
will not close and it will cause frost.
5. Hook the ends of the tilting pocket (
7
) into both brackets (
8
),
and push down until they lock into place.
6. Insert the upper drawer.
Setting up your French Door Refrigerator
1. Pull out the rails to the full length on each side of the cabinet evenly.
7
8
