8_ Operation Instruction
Operation instruction
Control panel
DW60M5040FS／DW60M5040FW
1
5 94 8
2
6
73
1 Press this button to turn on your dishwasher : the screen lights up.
2 Program To select washing program press this button.
3 Half load
4 Delay start
Press this button to set the delayed hours for washing. You can delay the
start of washing up to 24 hours. One press on this button delays the start of
washing by one hours.
5 Display Running indicator, delay time, information codes and etc.
6 Hygiene
7 Multi tab
Push the Hygiene button for the best possible hygiene in your dishwasher.
At the final rinse it heat up to 70 °C and hold this temperature for a several
minutes. This function is available with all program except Pre Wash.
8
Control lock
To select Multi in 1 option which needs salt and rinse aid but a Multi in 1
tablet. This option can be used with other programme ( Intensive, Eco and
normal).
To lock and unlock the buttons on the control panel, hold down the
Control lock
button for 3 seconds.
9
In power on condition, close the dishwasher door and select the cycle and
desired options. Press the button to begin the cycle.
When you want to pause the dishwasher while running, press the
button and make sure to open the door slowly and carefully.
You can reset the machine by pressing the button for 3 seconds
during washing. After reset, the dishwasher goes to the initial state except salt
consumption setting of water softener.
• When the door is open only the
button will operate.
• You can select options (Multi in 1, Delay start, Half load, Hygiene and Rinse Add) before
starting a cycle.
DW4000KM-00000A-00_EN (Basic)_160323.indd 8
Control lock option allows you to lock the buttons on the control panel so
children cannot accidentally start the dishwasher by pressing the buttons on
the panel.
To select Half load function. With this Half load function you can only use it
to wash either basket, and you will see less water and energy consumption.
It can only be used with all program except Pre Wash．
