32_ troubleshooting
Dishwasher leaks Overfill dispenser or rinse aid
spills.
Be careful not to overfill the rinse aid
dispenser.
Spilled rinse aid could cause
oversudsing and lead to overflowing.
Wipe away any spills with a damp
cloth.
Dishwasher isn’t level. Make sure the dishwasher is level.
Display “Sb” code. Normal phenomenon. When turn on the dishwasher or
When ended washing program, occur
the “Sb”.
It mean dishwasher is stand-by
condition.
The result of washing performance can be wrong because problem with power supply (interruption of
electric power). Pls check the result one more time before calling service.
ERROR CODES
When some malfunctions come on, the appliance will display error codes to warn you:
e1
Longer water inlet time. Faucets is not opened, or water
intake is restricted, or water pressure
is too low.
e3
Longer heating time, but not reaching
required temperature.
Malfunction of temperature sensor or
of heating element.
e4
Overfilled. Too much inlet water.
e6
Failure of temperature sensor. Short circuit or break of temperature
sensor.
e7
Failure of temperature sensor. Open circuit or break of temperature
sensor.
WARNING : If overflow occurs, turn off the main water supply before calling a service. If there is water
in the base pan because of an over fill or small leak, the water should be removed before restarting
the dishwasher.
troubleshooting
