installing your dishwasher _11
TENSION ADJUSTMENT OF THE DOOR SPRING
The door springs are set at the factory to the proper tension for the outer door. If aesthetic wooden panel
are installed, you will have to adjust the door spring tension. Rotate the adjusting screw to drive the adjustor
to strain or relax the steel cable.
Door spring tension is correct when the door remains
horizontal in the fully opened position, yet rises to a close
with the slight lift of a finger.
CONNECTION OF DRAIN HOSES
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into the sink, making
sure to avoid bending or crimping it. Use the special plastic support that comes with the appliance. The
free and of the hose must be at a height between 400 and 1000 mm and must not be immersed in water to
avoid the back flow of it.
: The special plastic hose support must be solidly fastened to the wall to prevent the
drain hose from moving and allowing water to spill outside the drain.
02 installing your dishwasher
Drain hose hook
ø 40 mm
Max 1000 mm
Min 400 mm
