English - 24
Operations
Control panel
1 Course Selector Turn the dial to select a course.
2 Display area
Displays information of the current course including the course name,
remaining washing time, and settings.
3
Temp. [
]
Press to change the water temperature for the current course.
Press and hold for 3 seconds to turn on/o the Drum Light.
4
Rinse [
]
Press to change the rinse times for the current course.
You can set the rinse times up to 5.
5
Spin [
]
Press to change the spinning speed for the current course.
• Rinse Hold: The final rinse cycle is suspended so that the
laundry remains in the water. To unload the laundry, run a drain
or spin cycle.
• No Spin: The drum does not spin after the final drain cycle.
6
Options [
] Press to enter the Options [ ] screen.
7
Prefer Mode [
]
Press to enter custom options screen. 3 custom options are available
but multiple selection is not allowed.
Press and hold for 3 seconds to enter the Settings screen.
8
Navigation
buttons
Use to navigate through the menus or to adjust the value of the
settings: Temp. [
], Rinse [ ], and Spin [ ].
9
Start/Pause [
]
Press to start or stop an operation.
10
Power [
]
Press to turn on/o the washing machine.
Untitled-21 24 2015-07-16 9:55:28
