Productos de la Marca Samsung

setting up your new washing machine _13

01SETTINGUP

STEP 3

Adjustingthelevellingfeet

When installing your washing machine, ensure that the power plug, the water supply and

the drain are easily accessible.

1. Slide the washing machine into position.

2. Levelyourwashing

machine by turning the

leveling feet in and out as

necessary by hand.

3. When your washing machine is level, tighten the nuts using

the wrench supplied with your washing machine.

STEP 4

Connectingthewateranddrain

Connecting the water supply hose

1. TaketheL-shapedarmttingforthecoldwater

supply hose and connect it to the cold water

supply intake on the back of the machine.

Tighten by hand.

The water supply hose must be connected

to the washing machine at one end and to

thewatertapattheother.Donotstretchthe

watersupplyhose.Ifthehoseistooshort,

replace the hose with a longer, high pressure

hose.

2. Connecttheotherendofthecoldwatersupply

hose to your sink’s cold water tap and tighten

itbyhand.Ifnecessary,youcanrepositionthe

water supply hose at the washing machine end

by loosening the ﬁtting, rotating the hose, and

retightening the ﬁtting.

Forselectedmodelswithanadditionalhotwaterintake:

1. TaketheredL-shapedarmttingforthehotwatersupplyhoseandconnectittothehot

water supply intake on the back of the machine. Tighten by hand.

2. Connecttheotherendofthehotwatersupplyhosetoyoursink’shotwatertapandtighten

it by hand.

3. Use a Y-piece if you only want to use cold water.

WD8754CJ-02764A_EN.indd 13 2011-5-30 14:54:28