Dil ID: 10
Dil Adı: spain
Dil Kodu: es2tayfun Productos de la Marca Samsung
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



SAMSUNG Washing Machine Owner’s Instructions A-4
Connecting the water supply hose
1. Remove the adaptor from the water supply hose.
2. First, using a ‘+ type screw driver, loosen the four screws on the adaptor.
Next, take the adaptor and turn part(b) following the arrow until there is a
5mm gap.
3. Connect adaptor to the water tap by tightening the screws firmly.
Then, turn part (b) following the arrow and put(a) and (b) together.
a
b
4. Connect the water supply hose to the adaptor. Pull down part (c) of the
water supply hose.
When you release part (c) the hose automatically connects to the adaptor
making a click’ sound.
c
5. Connect the other end of the water supply hose to the inlet water valve at
the top of the washer.
Screw the hose clockwise all the way in.
If the water tap has a screw type faucet, connect the water supply hose to
the tap as shown.
Notice :
After completing connection, if water leaks from the hose, then repeat the same steps. Use the
most conventional type of faucet for water supply. In case the faucet is square or too big, remove
the spacing ring before inserting the faucet into the adaptor.
The appliance is to be connected to the water mains using new hose-sets and that old hose-sets
should not be used.
Installing the Washing Machine
WD7122CZ-02540K_EN.indd 4 2008-08-13 ¿ÀÀü 9:36:40