setting up your washer
FUZZY PROGRAM
Selects the best washing program automatically.
1. Press the Power button to “On”.
2. Press the Start/Pause button.
Water level is selected automatically. Washing rinsing, and spinning follow.
If you want to pause, press the Start/Pause button again. You can change the program
when paused.
3. Close the lid.
QUICK PROGRAM
If you want to wash those frequently used towels or less dirty laundry time.
Because washing is speedy, it is good for light or less stained laundry.
1. Press the Power button to “On”.
2. Press the Program select button.
3. Press the Start/Pasue button.
Water level is selected automatically. Washing, rinsing, and spinning follow. If you want to
pause, press the Start/Pasue button again. You can change the program when paused.
4. Close the lid.
CLEAN TUB PROGRAM
Use this program to clean the tub. It will keep the tub clean and sanitary.
1. Press the Power button to “On”.
2. Press the Program select button two times.
3. Press the Start/Pause button.
4. Add a delicated detergent and close the lid.
- Never place laundry in the tub when cleaning inside the tub, as this can cause
discoloration or damage to the laundry.
- When doing the laundry after cleaning the tub, you may find some impurities. These are
just detergent residues and impurities after the tub cleaning. Perform the rinse cycle two
to three times.
- The Soak function (20 minutes) is set automatically.
- The water level is set to Mid early on and then changed to High during the rinse.
KEEPING THE TUB CLEAN
When using the machine under humid conditions for an extended time, various bacteria from the
air may stick to the tub and form black dirt (fungi), causing damage to the human body.
To keep the tub clean and hygienic at all times, it is recommended reading “CLEAN TUB
PROGRAM” above and using only dedicated or recommended detergents to clean the tub
regularly at least once every one to three months.
