Devices_ 32
TYPE SETTINGS DESCRIPTION
SNMPv1 & SNMPv2 SWS Settings This is related to network connected devices. Some features
of SyncThru™ Admin 5 use a HTTP connection, such as
firmware upgrading. If SWS credential is enabled in
device-side, you need to configure SWS settings in this
Connection Settings.
The options are as follows:
• SWS Login ID
• SWS Login Password
SNMP Settings This is related to SNMPv1 or SNMPv2 compatible devices. If
you want to manage network connected devices, you need to
check the SNMP settings first. SyncThru™ Admin 5 collects
all the information from devices using SNMP, which means
that SNMP Read Community should be the same as the
SNMP Read Community (or Get Community) your devices
have.
If you want to use the Device Configuration feature
SyncThru™ Admin 5 provides, you need to check SNMP
Write Community first. If SNMP Write Community is
different from what the specified devices have, Device
Configuration will always fail.
The options are as follows:
• SNMP Read Community
• SNMP Write Community
SyncThru™ Admin 5 uses the following default
values:
• SNMP Read Community. public
• SNMP Write Community. public
You can see these values in Settings menu >
Settings > Device Management > Connection
Settings.
SNMPv3 SWS Settings This is related to network connected devices. Some features
of SyncThru™ Admin 5 use a HTTP connection such as
firmware upgrading. If SWS credential is enabled device-side,
you need to configure SWS settings in Connection Settings.
The options are as follows:
• SWS Login ID
• SWS Login Password
SNMP Settings This is related to SNMPv3 compatible devices. If you want to
manage only SNMPv3-enabled devices, you need to check
the SNMPv3 settings first. If any SNMPv3 enabled device is
not working with SNMPv1 or SNMPv2, SyncThru™ Admin 5
will add it to Unconfigured Devices (Please see Settings
menu > Settings > Device Management > Unconfigured
Devices).
The options are as follows:
• Context Name
• User Name
• Security Mode
• Authentication Password
• Privacy Protocol
• Privacy Password
Local Local Settings This is related to locally connected devices. If you want to
connect to the locally connected devices, you need to enter
credentials because remote computers require
administrator’s credentials. You also need to enter
credentials when you try to start discovery for locally
connected devices. (Please see Discovery menu >
Discovery Settings > Discovery Settings > Discover
Local Devices option.)
The options are as follows:
• Account
• Password
