HybridDigitalVideoRecorder
HDVRseries
49
*Only the 1st channel of full analog mode and hybrid mode can support this function. If this
function is enabled, then video blind is invalid.
Picture 5.12 Intelligent Analysis
Channel Number
Only the 1st channel has maximum resolution of 1080P in full
analog(DVR) mode and hybrid(HVR) mode
Enable
Tick it to enable the video analysis function, and then go for
further setting
Algorithm Rule
Options (perimeter alert/items care/video diagnosis) for
choosing the algorithm rule of detection
Rule
The related setting page is different when choosing different
algorithm rules.
Cordon:
¾ Show traces: When alarm is triggered, there will be a red box around moving objects.
¾ Sensitivity: To apply for different requirements, there are 3 options in the drop-down box
(high / middle / low).
¾ Minimum image distance: The range is between 0 and 30 %; the more flexible it is, the
less image distance.
¾ Alert way: there are two kinds of alert ways; one is cordon and the other one is warning
area. Cordon: there are three prohibited directions: bidirectional prohibited, from top to
bottom (from left to right), from bottom to top (from right to left). When the setting cordon
is too sloping, show from left to right / from right to left, otherwise it will be from top to
bottom / from bottom to top. When the moving object meets preset cordon rules, the
alarm will be triggered.
Warning area: there are three kinds of prohibited directions: bidirectional prohibited,
enter and leave. When the moving object meets preset warning area rules, alarm will be
triggered.
¾ Rules: Click setting and enter rule setting page. Next, right-click mouse, choose add
