Step 3: Please align the screw holes on the HDD with those on the HDVR case and secure
them with the given screws.
Step 4: After the HDD is secured, it should look like the one in the pictures (front and
back) below:
Contents
Quick Installation Guide x 1 Power Adapter x 1 USB Mouse x 1
CD Disk x 1 SATA Cable x 1 Food Pad x 4
RS485 Connector x 1 SATA Power Cable x 1 Screw Kit x 1
Hard Disk Installation
Before installing the HDD, please make sure there is no pre-congured
partition in this HDD. If yes, please delete all the partitions before the
installation.
Step 1: Remove the upper case.
Step 2: Plug the HDD power cable and SATA cable into the slot of the PCBA board and the
HDD, respectively, making sure the connections are well done.
Hardware Connection
HDVR-830
HDVR-430
HDVR-1630
Name Description
V1-V16 Composite video broadcast signal (CVBS) input interface.
A1-A4 The input interface of the audio signal.
V-OUT Composite video broadcast signal (CVBS) output interface.
A-OUT The output interface of the audio signal.
LAN The network interface of RJ-45.
HDMI The output interface of the HDMI video signal.
VGA The output interface of the VGA video signal.
Power 12V DC, 2A
485+/485- The interface of the alarm input, the alarm output and RS-485.
