12
3.2 Hardware Installation
Please connect the ONU to you devices as follow:
Step 1. Connecting the RJ-45 network cable.
a. Plug-in the RJ-45 cable to 10/100/1000 GE Port or 10/100
FE Ports.
b. Plug-in the other side to your host or devices.
Step 2. Connecting the ber cable.
Before connecting, please note:
Keep the optical connector and the optical ber clean.
Make sure the bending diameter of the ber is more than 6cm.
Otherwise; the optical signal loss may be increased.
Cover a protective cap to guard against dust and water when the
ber is not used.
a. Remove the protective cap of the optical ber.
b. Remove the protective cap of the ONU optical interface
(PON interface). Insert the ber into the PON interface.
Step 3. Connecting Power Adapter.
a. Connect the power adapter to the power socket on the
ONU.
b. Insert the other end into a power outlet.
12V DC
RESET
SPEED
LNK/ACT
10/10010/100/1000PON
Power
Power
Adapter
Laptop
IPTV / Set-top-Box
10/100
10/100/
1000
OLT/
Splitter
Fiber
Figure 3-1: EPN-103 connection diagram
