Continued
58364901
c. For legal size and larger media,
position the brackets.
2. If using paper, fan it.
3. Place the print media in the tray.
4. Gently push back in the tray.
5. Set the Media Weight. You can use
paper up to 54 lb. US Bond (113 lb.
Index) in the auxiliary trays. The
default setting is Auto. If you are
consistently using a specific weight
paper in the auxiliary trays, enter
the printer menu and set the media
weight for the trays.
a. Press MENU repeatedly until
MEDIA MENU appears on the
display.
b. Press ITEM + repeatedly until
you see TRAY2 MEDIA-
WEIGHT on the display.
c. Press VALUE + or VALUE -
repeatedly until the desired set-
ting appears on the second line
of the display.
d. Press SELECT to engage the
new setting.
e. If you installed two trays, go
back to step b and repeat the
process for TRAY3 MEDIA-
WEIGHT.
f. Press ON LINE to exit the
menu.
PHASE 3:ACTIVATE THE
A
UXILIARY TRAYS IN THE
PRINTER DRIVER
Windows® PCL Driver
1. Click Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right click the OKI C9300 or
C9500 PCL printer icon, then click
Printing Preferences (Windows
2000), or
Properties (Windows
XP, NT, Me, 98, 95).
3. Click the
Device Options tab.
4. At
Available Tray, set the total
number of trays installed (Tray1 +
auxiliary trays), then click
OK.
5. Click
OK, then close the Printers
dialog box.
Windows PostScript® Driver
1. Click Start — Settings —
Printers
. The Printers dialog box
opens.
2. Right click the OKI C9300 or
C9500 PostScript printer icon, then
click
Properties.
3. Click the
Device Settings tab
(Windows XP, 2000 and NT 4.0) or
the
Device Options tab (Windows
Me, 98, 95).
4. Under
Installable Options, click
Available Tray or (Additional
Trays
) and select the number of
auxiliary trays installed.
5. Click
OK, then close the Printers
dialog box.
Macintosh® Driver (OSX)
1. As of OS 10.1.5, Apple has not
enabled Printer Options
adjustment. Therefore, this
selection is unavailable.
Macintosh® PostScript Driver
1. Activate Chooser from the Apple
menu.
2. Select
LaserWriter 8.
3. Click
Printer — Setup.
4. Click
Configure.
5. Change the
Available Tray setting
to match the number of auxiliary
trays installed.
6. Click
OK twice.
7. Close
Chooser.
