User Guide for the NETGEAR 802.11b Wireless Compact Flash Card MA701
Basic Setup for a PDA 3-7
M-10204-1
Verify wireless connectivity to your network.
a. Verify that the Status information matches your wireless network.
b. Check the LED on the MA701:
– Solid Green: Associated with an access point or ad-hoc wireless device.
– Flashing: Power save mode (default from power up or reset), not connected to an
access point, or associated with an ad-hoc network.
– Off: No power applied to the card.
c. Verify connectivity to the Internet or network resources.
Note: If you are unable to connect, see “Troubleshooting” on page 3-10.
