RouteFinder MTASR3 User Guide
MTASR3
72
is overridden by any of the following commands:
&F
,
&M
,
&Q
, and
\N
.
+ES = ?
shows the only
allowed value.
Command: &&S Speaker Codec Loopback
Values: n/a
Description: Provides a loopback from the microphone to the speaker.
For testing and debugging only.
Command: %T94 Testing External RAM
Values: n/a
Description: This command is used for testing the external RAM. Enter AT%T94<cr> to determine the status of
external RAM. The response you should receive will be either "FAIL" or "PASS"
Command: %T125 Testing DSP 56K Code Version/Checksum
Values: n/a
Description: Entering AT%T125<cr> tests the DSP56K code version and checksum running in external RAM.
Upon issuing this command the user may then issue ATI4<cr> to get DSP version or ATI1<cr> to
get DSP checksum in RAM.
Entering AT%T124<cr> tests the DSP56K code version and checksum running in internal ROM.
Upon issuing this command the user may then issue ATI4<cr> to get DSP version or ATI1<cr> to
get DSP checksum in ROM.
