Problem solving guide
66
Problem Cause and remedy
The Inlet/Drain and
Rinse aid indicators are
flashing at the same
time.
Fault number is
showing in the display.
There may be a technical fault.
Switch the dishwasher off with the button.
Switch the dishwasher back on after a few sec‐
onds.
Select the programme you want.
Press the Start button.
If the indicator lights flash again, there is a technical
fault.
Call the Miele Service Department.
Fault :
The drain pump is still
running, even with the
door open.
The Waterproof system has reacted.
Close the stopcock.
Call the Miele Service Department.
Fault : A fault has occurred in the circulation pump.
Switch the dishwasher off for at least 30 seconds
with the button.
Switch the dishwasher back on.
If the fault message appears again, there is a techni‐
cal fault.
Call the Miele Service Department.
