Keypad tone
An audible tone sounds each time a
sensor pad is pressed.
The key pad tone is activated as stan
-
dard at the factory.
^
Select the option you want and
confirm with
OK.
Brightness
There are seventeen different display
brightness settings.
The dishwasher is delivered with the
display brightness on setting 8.
^ Select the setting you want and
confirm with
OK.
Contrast
There are seventeen different display
contrast settings.
The dishwasher is delivered with the
contrast on setting 8.
^
Select the setting you want and
confirm with
OK.
Standby
To save energy the display goes out
after 10 minutes if you do not press any
sensor pads during this time.
The Stand-by indicator light flashes.
Press any sensor pad to switch the
display back on again.
^
Select the option you want and
confirm with
OK.
Memory
You can use the Memory function to
save the last programme selected.
Instead of the main menu, the last
programme selected will appear in the
display when the dishwasher is
switched off and back on again at the
end of a programme or the door is
opened and then closed.
The dishwasher is delivered with the
Memory function activated.
^
Select the option you want and
confirm with
OK.
Settings menu J
80
