Chapter 4. Completing the parts replacement
After replacing the parts, you need to close the cover and reconnect cables,
including telephone lines and power cords. Also, depending on the part that was
replaced, you might need to confirm the updated information in the Setup Utility
program. Refer to ″Using the Setup Utility″ in the User Guide for this product.
This section provides instructions on how to complete the parts replacement.
1. Ensure that all components have been reassembled correctly and that no tools
or loose screws are left inside your computer. See “Locating components” on
page 8 for the location of various components.
2. Make sure that the cables are routed correctly before closing the computer
cover.
Important
Correctly route all power supply cables to avoid interference with
replacing the computer cover. Keep cables clear of the hinges and sides of
the computer chassis.
Figure 23. Routing the cables
© Lenovo 2005, 2007. Portions © IBM Corp. 2005. 27
