Productos de la Marca Leica-biosystems

Leica IP C

Fig. 24

4547

Inserting the new flash bulb

Fig. 26

Fig. 23

Fig. 25

4. Instrument Setup

• Firstinsertashieldingglass(85) into the two

holders (86) (Fig. 23).

• Insert the newflashbulbintosocket (46,

Fig. 25); then push it carefully inwards as far

as it will go (Fig. 26) (the polarity marker (+)

must not be visible any longer). If necessary,

move flash bulb gently up and down.

• Makesurethatthebulbisinsertedcorrectly.

The electrode marked with + (47) has to be

inserted into the socket (46) with the same

mark (48, Fig. 25).

Caution!

If the bulb electrodes are inserted the

wrong way, the flash bulb will still

function, but the bulbs life will be con-

siderably reduced.

• Thecontactspring(44) has to touch the igni-

tion wire (45) of the bulb after being inserted.

• Swingthereflectordownwards.Reinsertand

retighten screw (49).

• Closelid(4) of the instrument again.