Color Calibration/Linearization
This information is solely for use of KIP Personnel and KIP Authorized Dealers. No part of this publication may be copied,
reproduced or distributed in any form without express written permission from KIP. 2013 KIP. vii.iv
5
Toner-Limit
[For ink-jet printers this is called ink-limit]
It is not normally necessary to change any of these settings.
Toner-Limit
The Toner-Limit value reduces the maximum area coverage of each color plane. The default value is 100% for
all media and print modes.
Example: If Toner Limit = 100% and the input color is 100% Cyan, the resulting Cyan area coverage is 100%. But if
Toner-Limit = 50% and the input color is 100% Cyan, the resulting Cyan area coverage is 50%.
Total Toner-Limit
The Total Toner-Limit reduces the maximum area coverage of all planes combined. If the total area coverage is
greater than this value, the area coverage of each color plane is reduced so as not to succeed the total area
coverage.
