bizhub PRESS C1100/C1085 (IC-602) 6-9
6.1 Both Sides Adjustment
6
% Write down the measured values so that you do not forget them.
16 Press [X] or [Y] at each point, then enter the measured value using either the keypad on the screen, [,],
or [+].
% If the printing position is misaligned leftward or upward, enter the value with a negative sign (-). If
the printing position is misaligned rightward or downward, enter the value with a positive sign (+).
% To reset a value, press [Clear].
% To switch the positive sign (+) and negative sign (-), press [+/-].
17 When entry processing is completed, press
[Adjustment Start].
18 After the adjustment is completed, press [OK].
% To finely adjust the adjustment value, con-
tinuously proceed to step 4 in "Zoom and
Image Shift Adjustment" (page 6-10).
