ENWW Network configuration page 13
Signal Strength
(1-5)
The transmitting or return signal graded on a scale of 1 to 5:
● 5 — Excellent
● 4 — Good
● 3 — Fair
● 2 — Poor
● 1 — Marginal
● No signal: no signal detected on the network
● <blank>: signal strength is left blank when the printer is
scanning for an SSID.
● Not applicable: this parameter does not apply to ad-hoc
networks.
Access Point HW
Address
The hardware address of the access point on the network to
which the printer is connected:
● <MAC address>: the unique MAC (media access control)
hardware address of the access point.
● Not applicable: this parameter does not apply to ad-hoc
networks.
Channel The channel number currently being used for wireless
communication. This depends on the network in use, and might
differ from the requested channel number. The value is from 1
to 14; countries/regions might limit the range of approved
channels.
● <number>: value ranging from 1 to 14, depending on
country/region.
● None: no channel is in use.
● Not Applicable: the WLAN is disabled.
Note In ad-hoc mode, if you are not able to
receive or transmit data between your
computer and the printer, make sure that
you are using the same communication
channel on your computer and the printer.
In infrastructure mode, the channel is
dictated by the access point.
Field Description
