Logging / Monitoring / Reporting
Feature Description
Internal system logging Syslog storage in RAM, display via web-based configuration user interface (http/https), filter
for subsystem, level, message
External system logging Syslog, several syslog server with different syslog level configurable
E-Mail alert Automatic E-Mail alert by definable events
SNMP traps SNMP traps (v1, v2, v3) configurable
Activity Monitor Sending of information to a PC on which Brickware is installed
IPSec monitoring Display of IPSec tunnel and IPSec statistic; output via web-based configuration user interface
(http/https)
Interfaces monitoring Statistic information of all pysical and logical interfaces (ETH0, ETH1, SSIDx, ...), output via
web-based configuration user interface (http/https)
WLAN monitoring Detailed display for radio, VSS, WDS links, bridge links, client links.
WLAN Monitoring Display for each link: MAC address, IP address, TX packets, RX packets, signal strength for
all receiver antennas, signal-to-noise ratio, data rate; output via web-based configuration user
interface (http/https)
IP accounting Detailed IP accounting, source, destination, port, interface and packet/bytes counter,
transmission also via syslog protocol to syslog server
RADIUS accounting RADIUS accounting for PPP, PPTP, PPPoE and ISDN dialup connections
Keep Alive Monitoring Control of hosts/connections via ICMP polling
Tracing Detailed traces can be done for different protocols e.g. ISDN, PPPoE, ... generation local on
the device and remote via DIME manager
Tracing Traces can be stored in PCAP format, so that import to different open source trace tools (e.g.
wireshark) is possible.
Interfaces
Feature Description
Ethernet 5 x 10/100/1000 Mbps Ethernet Twisted Pair, autosensing, Auto MDI/MDI-X, up to 4 ports can
be switches as additional WAN ports incl. load balancing, all Ethernet ports can be configured
as LAN or WAN.
SFP slot SFP slot for conventional optical 10/100/1000 Mbps Ethernet SFP module
WLAN IEEE 802.11a/b/g/n; 1 radio module, 2.4 und 5 GHz band, 3 external antennas
USB 2.0 host USB 2.0 full speed host port for connecting UMTS (3G) USB modem sticks (supported sticks:
see www.funkwerk-ec.com)
Serial console Serial console interface / COM port (mini USB)
GSM/UMTS (3G) UMTS (3G), HSxPA (3G+), GPRS, Edge or GSM with intergrated GSM/UMTS (3G) modem
External UMTS antenna connectors Two SMA antenna connectors for external UMTS antennas
External WLAN antenna connectors Three reverse SMA antenna connectors for external WLAN antennas
Funkwerk Enterprise Communications GmbH - Suedwestpark 94 - 90449 Nuremberg - Germany
Phone: +49 - (0)911 9673 0
Fax: +49 - (0)911 688 0725
bintec RS120wu
09.09.2010
Subject to technical
alterations
