Software Features
Feature Description
TCP/IP routing Routing information updating and distribution, static or dynamic (RIP v1/v2/triggered, RFC
2091), selectable for each interface, ProxyARP, BOOTP/DHCP forwarding
Extended IP routing Dependent on source/destination port, source IP address, TOS ..., i.e. policy-based routing
IP load balancing Bandwidth management
PPP Authentication mechanisms (PAP, CHAP, MS-CHAP, MS-CHAP v2), standard PPP, dynamic
IP address assignment (server and client mode)
PPPoE Point-to-Point Protocol over Ethernet (Client and Server) for high-speed Internet access over
ADSL (RFC 2516)
Dyn. IP addresses Simple Internet access without fixed IP addresses
DynDNS Router can still be reached over the Internet in spite of dyn. IP address
Funkwerk Access Point Discovery detection of configuered and unconfigured Funkwerk Access Points in the LAN
IP accounting Source, destination, port, interface, packets/bytes counter
Connection time out Short hold enables automatic call clearing
Hardware Features
Feature Description
Processor / memory TI Prozessor, 8 MB Flash, 32 MB RAM
ADSL RJ11 port for connections to splitter
ADSL chipset Texas Instruments chipset for ADSL modulation
LAN Autosensing 10/100 Mbps Ethernet twisted pair
4-port switch 4-port autosensing 10/100 Mbps Ethernet switch
WLAN Internal radio modul, 2,4 GHz Band, 1 external antenna (Antenna Diversity for 802.11b)
ISDN 2 x BRI (1 x external, 1 x internal)
Analogue 2 x FXS, 1 x FXO
Console Serial console port
Power supply External AC/DC converter 12 V DC, 1,25 A (approx. 2 W per internal ISDN-Bus)
Status LEDs Power, Status, 4 x 10/100 BT, WAN, DSL, VoIP, ...
Housing Metal housing
Fanless design Long lifetime
Dimensions 205 x 29 x 172 mm (W x H x D)
Weight Approx. 1000 g
