13
1 Symbols
Warning of general danger
Risk of electric shock
Read the operating instructions/notes!
Wear a dust mask!
Wear ear protection!
Wear protective gloves!
Do not throw in the household waste!
2 Technical data
Power 2200 W
(110 V-Version: 16 A)
Rotational speed (no load) 10000 - 22000 rpm
Quick depth adjustment 80 mm
Fine depth adjustment 20 mm
Connecting thread on drive shaft M 22 x 1.0
Max. routing tool diameter 89 mm (3½")
Weight (without mains cable) 7.8 kg
Protection class
/ II
3 Machine features
[1.1] Adjusting wheel for fi ne routing depth ad-
justment
[1.2] Dial ring for fi ne routing depth adjust-
ment
[1.3] Rotary knob for fi xing routing depth
[1.4] Scale for routing depth
[1.5] Depth stop with indicator
[1.6] Clamp lever for depth stop
[1.7] Eccenter for connecting depth stop and
stepped stop
[1.8] Stepped stop
[1.9] Lever for changing base runner
[1.10] Rocker switch for spindle lock
[1.11] Adjusting wheel for speed control
[2.1] Locking knob for on/off switch
[2.2] On/off switch
[2.3] Lever for locking protective guard
[2.4] Handles
[2.5] Extractor connector
The specifi ed illustrations can be found at the be-
ginning and at the end of the operating instruc-
tions.
4 Intended use
The routers are designed for routing wood, plas-
tics and materials similar to wood. The routing
tools included in Festool sales documents are
also suitable for routing aluminium and plaster-
board.
The user bears the responsibility for damage and
accidents caused by improper use.
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
- Hold power tool by insulated gripping sur-
faces, because the cutter may contact its own
cord. Cutting a “”live”” wire may make exposed
metal parts of the power tool “”live”” and could
give the operator an electric shock.
- Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form. Holding the work by your hand or against
1 Symbols ....................................................... 14
2 Technical data ............................................. 14
3 Machine features ......................................... 14
4 Intended use ................................................. 14
5 Safety instructions ...................................... 14
6 Commissioning ........................................... 15
7 Adjustments ................................................ 15
8 Operation ...................................................... 18
9 Accessories .................................................. 19
10 Service and maintenance ............................ 20
11 Environment ................................................. 20
12 EU Declaration of Conformity ...................... 20
Router OF 2200
Table of contents
