5. OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indica-
tors are on before the programme
starts.
5.1 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1.
Press and hold, at the same time,
Rapido and Ammollo until the Multi-
tab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1.
Set the water softener to the highest
level.
2.
Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5.
Adjust the released quantity of rinse
aid.
5.2 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water soft-
ener occurs. It is not possible to deacti-
vate these acoustic signals.
There is also an acoustic signal that oper-
ates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2.
Press and hold, at the same time, Au-
toFlex and Intensivo until the indica-
tors of Eco, AutoFlex and Intensivo
start to flash.
3.
Press Intensivo.
• The indicators of Eco and AutoFlex
go off.
• The indicator of Intensivo continues
to flash.
• The end indicator is off.
4. Press Intensivo. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
5.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (3).
2. Press Intensivo.
• The indicators of Eco and AutoFlex
go off.
• The indicator of Intensivo continues
to flash.
• The end indicator comes on.
3.
Press Intensivo. The end indicator
goes off. The acoustic signal for the
end of programme is deactivated.
4. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
ENGLISH 7
