10.2 How to activate the rinse
aid dispenser
1.
Press the on/off button to activate the
appliance. Make sure that the appli-
ance is in setting mode, refer to “Set-
ting and starting a programme”.
2.
Press and hold, at the same time Au-
toFlex and Intensivo until the indica-
tors of Eco, AutoFlex and Intensivo
start to flash.
3. Press AutoFlex.
• The indicators of Eco and Intensivo
go off.
• The indicator of AutoFlex continues
to flash.
• The end indicator is off.
4. Press AutoFlex. The end indicator
comes on. The rinse aid dispenser is
activated.
5.
Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
6.
Adjust the released quantity of rinse
aid.
7.
Fill the rinse aid dispenser.
11. TECHNICAL INFORMATION
Dimensions Width / Height / Depth (mm) 596 / 818 - 898 / 550
Electrical connection Refer to the rating plate.
Voltage 220-240 V
Frequency 50 Hz
Water supply pressure Min. / max. (bar / MPa) (0.5 / 0.05 ) / (8 / 0.8 )
Water supply
1)
Cold water or hot water
2)
max. 60 °C
Capacity Place settings 12
Power consumption Left-on mode 0.10 W
Off-mode 0.10 W
1)
Connect the water inlet hose to a water tap with a 3/4'' thread.
2)
If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
and electronic appliances. Do not dispose
appliances marked with the symbol
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH 15
