Dil ID: 10
Dil Adı: spain
Dil Kodu: es7tayfun Productos de la Marca Dymo
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



6
To edit a barcode, press
+
SYMBOL
BARCODE
; the barcode
characters only will be displayed and the barcode
symbol
1234
will appear in the display.
Press
or +
SYMBOL
BARCODE
again to return to the
label.
On a single line label, a bar code can be mixed with text
which is small, medium or large size:
A two-line label always has small size text when it is
mixed with a barcode.
Text entered before pressing followed by +
SYMBOL
BARCODE
, will result in text above the barcode:
Entering the text after pressing
at the end of a
barcode will produce text below the barcode:
Text can be
underlined, eg:
or
A box can be added around the complete label:
Troubleshooting
No display
check machine is on
replace discharged batteries
check AC adaptor.
No printing or poor text
replace discharged batteries
check tape cassette installed correctly
clean the print head
replace the tape cassette.
Tape jammed
lift out tape cassette carefully
remove/release jammed tape
DO NOT cut the ink ribbon – turn spool
B to
tighten
cut off excess label tape
refit/replace the tape cassette.
Poor cutter performance
clean the cutter blade regularly
Poor tab cuts
replace tab cutter blade
F – remove door F then
locate and pull hard upwards to remove the cutter
block.
WARNING – the blade is extremely sharp!
No response to print key
!!!!!!!! in the display indicates a printer jam. Press
any key to return to normal display. Open the
cassette compartment and free the jam.
flashing in the display indicates
discharged batteries. Press any key to return to
normal display. Replace the batteries.
No success?
Call the customer service telephone number in your
country – see the warranty booklet.
In the USA, call 800-645-6051
In Canada, call (905) 670-2222
Cleaning
Clean the cutter blade regularly: Remove the
cassette, then press and hold down cutter lever
D
to expose cutter blade D, then use a cotton bud
and alcohol to clean both sides of the blade. Release
cutter lever
D.
Check and clean print head face
D regularly using a
cotton bud and alcohol ONLY.
ABC
123
123
ABC
1 2 3
1 2 3
123
1 2 3
ABC
1 2 3
ABC
ABC
ABC
123
1 2 3
DEF
DYMO 5500
ABC
1 2 3
ABC
ABC
123
1 2 3
DEF
DYMO 5500
ABC
123
1 2 3
DEF
DYMO 5500