10. Plug the power cable into the power cable connecter at the back of the printer, wind the power cable onto the cable
hook as shown in the graphic, and lightly pull the power cable. Then, plug the other end of the cable into the
grounded outlet.
11. Turn on the printer.
NOTE: The printer will automatically detect the attached tray(s) but will not detect the paper type.
12. Print a Printer Settings page to verify the optional 1000-sheet tray module is installed correctly.
a. Press Menu.
b. Press
until Configure appears, and then press or .
c. Press
until Reports appears, and then press or .
d. Printer Settings is displayed. Press
.
The Printer Settings page is printed.
e. Verify 1000 Sheet Tray Module is listed in the printer settings under Printer Options.
If the tray modules are not listed, turn off the printer, unplug the power cable, and reinstall the optional
1000-sheet tray module.
13. After loading paper in the installed tray, specify the paper type from the printer operator panel.
Press
until the paper type for the installed tray appears, and then press .
14. If you installed the optional 1000-sheet tray module after installing the printer driver, update your driver by
