Paper Handling
Alerts
Displays the status, and whether to receive an E-Mail Alert for paper
handling.
Service Call Displays the status, and whether to receive an E-Mail Alert for Service Calls.
Print Server Settings
The Print Server Settings tab includes Basic Information, Port Settings, TCP/IP, NetWare, SMB, AppleTalk, E-
Mail Alert, and SNMP pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
System
Settings
Printer Name Specifies the name of the printer up to 31 alphanumeric characters.
Location Specifies the location of the printer up to 63 alphanumeric characters.
Contact Person Specifies the contact name, number, and other information of the printer administrator
and service center up to 63 alphanumeric characters.
Administrator E-
Mail Address
Specifies the contact address of the printer administrator and service center up to 63
alphanumeric characters.
Asset Tag
Number
Specifies the asset tag number.
EWS
Settings
Auto Refresh On Refreshes the contents of the status display pages automatically.
Off Does not refresh the status display pages automatically.
Auto Refresh
Interval
Sets the time interval for refreshing the contents of the status display pages
automatically from 15 to 600 seconds.
NOTE: The auto refresh feature is effective for the contents of the Top Frame, Printer Status page, Job List
page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet Ethernet
Settings
Auto Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T
Half-Duplex
Selects 10Base-T Half-Duplex as the default value.
10BASE-T
Full-Duplex
Selects 10Base-T Full-Duplex as the default value.
100BASE-TX
Half-Duplex
Selects 100Base-T Half-Duplex as the default value.
