The Cycle Memory Feature
Your dishwasher remembers the settings for the last cycle it ran.
If you want your dishwasher to run the same cycle as it
ran the previous time:
1. Press the START/STOP button once.
The START/STOP button light will flash and
the lights on the buttons for the last cycle and
options run will be lit.
2. Press the START/STOP button again to run
the previous cycle (or you may press a
different cycle and press START/STOP).
3. Close the door. After a short pause, the dishwasher will
begin to operate.
If the delay feature was used during the previous cycle, your dish-
washer will start after the number of hours originally selected.
Draining Standing Water
To drain standing water from the bottom of your dishwash-
er:
1. Press NORMAL.
2. Press START/STOP.
,
4.
Press CANCEL.
Close the door. After a short pause, you will
hear the water in the dishwasher begin to
drain. Once the water is drained, the dishwasher will stop.
The SECUREFeature
To secure the control panel:
1. Press and hold the SECURE button for three
seconds. All control panel lights are deactivat-
ed and none of the buttons operate.
2. To turn off the secure feature, press and hold the SECURE
button for three seconds.
The control panel beeps when you turn this feature on and off.
Use and Care Manual
