Connection and Setup
Connecting the Power Cord
Connect the power cable with 100-240V power supply.
NOTE:
• Th
e power input for the TV is 100-240V, 50/60Hz.
• Be sure the
power cord is disconnected and the TV is switched on before making
connections.
• To be completely disconnected from the supply mains, the mains plug of the television
should be disconnected from the mains socket outlet completely.
Connecting Antenna and Other Devices
NOTE:
• Make sure that all the components are connected correctly.
• For receiving
free to air TV broadcasts, we recommend that you use an external fixed
antenna. Should you require the use of a temporary antenna, please ensure that you
purchase an antenna with sufficient ability to receive in weak signal areas. Only when
you are in close proximity to a transmitter will a temporary antenna reproduce a signal as
strongly as a fixed antenna. A digital antenna on the roof is recommended.
•
YPbPr and AV can not be used at same time for they share of one audio channel.
RF Coaxial
Wire(75 ohm)
The equipment with
HDMI output function
Computer
The equipment with AV output
function (such as VCR, DVD,
set-top boxes, etc.).
Video
Audio L
Audio R
Yellow
White
Red
USB Drive(only for service)
COAXIAL
The equipment with
Component output function
White
Red
Red
Audio L
Audio R
Blue
Green
Pr/Cr
Pb/C
b
Y
