
31
fig. 21
Fitting the integrated
appliance door
Where non-standard integrated
appliance doors are supplied, additional
fitting instructions are required to
ensure compatibility with this product.
The machine is supplied with a fitting
template and these instructions should
be followed as normal.
However, the fitting template needs to
be located lower down the fascia door;
this is shown below.
The amount of oset, Y, depends on
the height of the fascia door and can be
calculated as X = 723mm.
For example, if you have a 731mm tall
fascia door and are fitting a door to your
dishwasher, then Y = 731-723 = 8mm.
Ensure that the hinge tensioners are
adjusted to balance the weight of the
door.
Fitting template
Y oset
X Door height