Productos de la Marca Blomberg

Owner’s Guide & Installation Instructions

15 / English

Installation Instructions

• Itisnotrecommendedtoinstallandoperatetheproduct on a

wooden floor or soft floor. If you have to install your product on a

wooden or frame construction floor, the floor must be reinforced

properly and the product must be located in the corner of the room

if possible.

• Neverplaceyourproduct on a carpet. This prevents air circulation.

The electrical components of the machine may overheat and cause

damage.

• Donotstandapplianceonthepowercable.

• Donotinstallandoperateyourproduct in ambient temperatures

lower than 32˚F (0˚C). Controls may stop working properly in such

condition.

• Ifthereisdangeroffrost,drainallremainingwaterinpumpand

hoses since it may freeze and cause damage by bursting them (see

“Cleaning the drain pump filter”).

Installation Clearances

CAUTION

• The installation location must be large enough for the product

door to be fully opened for loading.

• The installation location must be large enough for ease of

operation, maintenance and service.

• Ensure there is min 1/2” of clearance on each side of the product

to allow slight sideways movement during washing and spin

drying.