Installing a V.34 Console Modem Module in a BayStack ARN Router
4
114313-B Rev 00
Removing an Installed Module
To remove an existing V.34 Console Modem module from the ARN base module:
1.
Locate the installed module and remove the screws that secure it to the
base module (Figure 4)
.
Figure 4. Removing the Screws from an Installed Module
2.
Grasping the edges of the module near the base module connector, pull
straight up and lift the module out of the connector socket.
3.
Place the removed module in an antistatic bag, or set it on an antistatic
mat.
4.
Proceed with Step 4 in the next section, “Installing a Console Modem
Module.”
ARN0046B
