
IP Firewall
18 NN40011-045 Issue 1.2 BCM50 Rls 6.0
2. Configure the rule as required:
Use the Add, Edit, or Delete buttons for Source or Destination
address to define where the data traffic is coming from and going to.
You may need to remove the default “Any” setting as this defines all
source/destination IP Addresses.
Select which Services the rule can use. If the service you require is
not defined in this list, refer to the Editing Available Services
section below.
Select the Action for Matched Packets (forward or block).
3. Ensure the Active checkbox is ticked if you want this rule to be
implemented.
4. Click Apply to save your settings.