3000 Series
12V DC phantom power will allow the transmitter to power condenser
microphones. All transmitter setup functions are menu-driven via
soft-touch controls. To prevent accidental changes, the controls are
covered by a sliding door when not being used. A dual-color status LED
illuminates green when power is on, and red when the transmitter is
muted. The transmitter housing is made of metal with an integral antenna
and a backlit LCD display.
Architect’s and Engineer’s Specications
The frequency-agile FM wireless microphone system shall consist of
a receiver and the appropriate transmitter. Operating in the UHF bands
of 482.000–507.000 MHz, 541.500–566.375 MHz , or 655.500–680.375
MHz, the system shall be capable of operating on any of 996 – 1001
PLL-synthesized frequencies per band. The frequency-agile FM wireless
receiver shall be all-metal and shall provide an automatic scanning
function to select appropriate local usable channels for proper wireless
system operation. All conguration functions of the receiver shall be
controlled by soft-touch controls on the receiver front panel. It shall be a
True Diversity receiver with two independent internal receiver sections,
automatically selecting the highest quality signal for the receiver’s output.
The system will be equipped with an advanced Tone Lock™ digital
identication system to ensure that only the desired wireless microphone
transmitter allows the receiver to be un-muted. The receiver shall have
shall have an alert LED on the front panel that indicates transmitter
low battery warning, signal loss and input overload. The receiver shall
continuously monitor and display the battery life indicator of the wireless
transmitter, the RF signal strength and the diversity selection of internal
dual tuner sections (A&B). The receiver shall have a rear panel selector to
lift the ground connection from pin 1 of the XLR-type output connector to
prevent ground loops. The receiver shall be able to be powered by 120V
AC 60 Hz or 12–18V DC at 500 mA. Antennas shall be located on the
rear of the receiver and shall incorporate standard BNC-type connectors
to allow them to be detached from the receiver to facilitate the receiver
being used with external antennas or antenna distribution devices.
Switchable 12V DC power shall be provided on the BNC-type connectors.
An accessory bracket should allow for the antennas to be located at the
front of the receiver. The receiver can be rack-mounted singly or in pairs
in a single rack space. The receiver’s design shall provide totally silent
audio output mute when the wireless transmitter is turned off or signal is
lost. The wireless receiver and the supplied metal rack-mounting brackets
shall be industrial black.
The frequency-agile FM wireless body-pack transmitter shall have
microphone and line level inputs. It shall provide DC voltage to power
microphones requiring DC bias. The body-pack transmitter shall be a part
of a wireless microphone system operating in the bands of 482.000–
507.000 MHz, 541.500–566.375 MHz , or 655.500–680.375 MHz. The
body-pack transmitter shall have a reversible clip allowing for up or down
cable entry. The transmitter shall have a recessed 4-pin locking input
connector and a viewable fuel gauge to indicate the remaining battery
life. 996-1001 frequencies shall be available and be selected with the
soft-touch controls under the safety panel. The device shall have a dual-
color LED to indicate power/mute status. There shall be an adjustment
to allow input gain changes with a range of 18 dB. The transmitter shall
include Tone Lock™ to identify the wireless transmitter to the wireless
receiver. This transmitter shall utilize two RF output power levels and
shall operate on two AA batteries. The transmitter battery compartment
shall be locking. All adjustments shall be via soft-touch controls and shall
remain as set even if the transmitter loses power or the batteries are
removed. A backlit LCD display shall be provided to show transmitter
setup parameters or frequency. The transmitter shall have a removable
and eld replaceable antenna.
The frequency-agile FM wireless handheld transmitter utilizing a dynamic
cardioid element shall be a part of a wireless microphone system
operating in the bands of 482.000–507.000 MHz, 541.500–566.375 MHz,
or 655.500–680.375 MHz. The capsule shall incorporate internal shock
mounting and have a two-stage integral pop lter. It shall be capable
of transmitting on any of 996-1001 frequencies per band. It shall have
a metal housing with a plastic antenna end cap. The transmitter shall
transmit a digital Tone Lock™ signal that allows the receiver to un-mute.
A dual-color LED indicator shall illuminate green when the transmitter
is turned on and shall illuminate red when the transmitter is muted.
A backlit LCD display shall be provided to show transmitter setup
parameters or frequency. The microphone shall have an audio input
level adjustment range of 18 dB. All adjustments shall be via soft-touch
controls and shall remain as set even if the transmitter loses power
or the batteries are removed. The transmitter shall operate on two AA
batteries and contain a Hi/Lo RF power selector. A battery fuel gauge
shall be incorporated to indicate the status of the internal batteries. The
transmitter shall be supplied with a heavy-duty stand clamp.
The frequency-agile FM wireless handheld transmitter utilizing a
high quality condenser cardioid element shall be a part of a wireless
microphone system operating in the bands of 482.000–507.000 MHz,
541.500–566.375 MHz , or 655.500–680.375 MHz. The capsule shall
incorporate internal shock mounting and have a two-stage integral pop
lter. It shall be capable of transmitting on any of 996-1001 frequencies
per band. It shall have a metal housing with a plastic antenna end cap.
The transmitter shall transmit a digital Tone Lock™ signal that allows the
receiver to un-mute. A dual-color LED indicator shall illuminate green
when the transmitter is turned on and shall illuminate red when the
transmitter is muted. A backlit LCD display shall be provided to show
transmitter setup parameters or frequency. The microphone shall have an
audio input level adjustment range of 18 dB. All adjustments shall be via
soft-touch controls and shall remain as set even if the transmitter loses
power or the batteries are removed. The transmitter shall operate on two
AA batteries and contain a Hi/Lo RF power selector. A battery fuel gauge
shall be incorporated to indicate the status of the internal batteries. The
transmitter shall be supplied with a heavy-duty stand clamp.
The frequency-agile FM wireless plug-on transmitter with locking 3-pin
XLR-type connector shall be a part of a wireless microphone system
operating in the bands of 541.500–566.375 MHz or 655.500–680.375
MHz. It shall be designed to convert a dynamic or condenser microphone
to wireless operation. It shall be capable of transmitting on any of
996 frequencies (adjustable in 25 kHz steps) per band and shall be
compatible with Audio-Technica 3000 Series and 1800 Series receivers.
The transmitter shall transmit a digital Tone Lock™ signal that allows the
receiver to un-mute. A dual-color LED indicator shall illuminate green
when the transmitter is turned on and red when the transmitter is muted.
The transmitter shall have an audio input level adjustment range of 24 dB.
All adjustments shall be via soft-touch controls and shall remain as set
even if the transmitter loses power or the batteries are removed. A sliding
door shall cover the setup controls when not in use. The transmitter shall
operate on two AA batteries and contain a Hi/Lo RF power selector. The
transmitter shall be equipped with a backlit LCD screen used to show
operating frequency and programming status. A battery fuel gauge shall
be incorporated into the display to indicate the status of the internal
batteries. The transmitter shall provide 12V DC to power condenser
microphones. The transmitter housing shall be metal with integral
antenna and captive battery door.
The wireless system shall be an Audio-Technica
(note to specier: choose one):
ATW-3110b – Basic Body-pack System
ATW-3131b – Body-pack System with Lavalier Microphone
ATW-3141b – Dynamic Handheld System
ATW-3171b – Condenser Handheld System
ATW-3192b – Body-pack System with Miniature Headworn Condenser
Microphone (black)
ATW-3192b-TH – Body-pack System with Miniature Headworn Condenser
Microphone (beige)
57
