Model W620
(WM-44)
Page
Date
2000-02
3
PROGRAMS
INTERRUPTING OR CHANGING A PROGRAM
If you need to stop or interrupt a program after you start the machine, turn the Program Control knob to 10
(Drain). Any water in the machine will be pumped out. Press the Door Open button to open the door. (It
won’t open until the water is out.) To restart the washer, close the door, add detergent (if needed), and
turn the controls to the desired settings.
Definition
Option
Spin Speed Control
In addition to the 600 rpm to 1200 rpm spin speed options, the Spin Speed Control has a No Spin/No
Drain option ( ) and a No Spin ( ) option. These are for delicate fabrics that should not be spun dry..
Super Rinse – Provides two additional rinses. Recommended for persons with sensitive
skin or allergies.
E
2
Economy – Extends the main wash time by 22 minutes. When used with low wash
temperatures (85°–100° F), this program conserves energy but gives the same high level of
cleaning. Note: You can only use this option with programs 1, 2 and 3.
5h
Delay Start – Automatically delays starting the program for five hours.
