Gateway Configuration Screen Definitions
SURFboard® SBG6700-AC Wireless Cable Modem Gateway • User Guide
Your user name for your email account. Check with your
email service provider.
Your user password for your email account. Check with
your email service provider.
Enable or disable emailing firewall alerts.
Remote Log
You can send firewall attack reports out to a standard SysLog server, so that many instances can be
logged over a long period of time. You can select individual attack or configuration items to send to the
SysLog server so that only the items of interest will be monitored.
There are four types of Firewall reports that you can monitor and log:
• Permitted Connections – Select to notify the server to send you email logs identifying who is
connecting to your network.
• Blocked Connections – Select to notify the server to send you email logs identifying who was
blocked from connecting to your network.
• Known Internet Attacks – Select to notify the server to send you email logs of known Internet
attacks against your network.
• Product Configuration Events – Select to notify the server to send you email logs of the basic
product configuration events logs.
The SysLog server must be on the same network as the Private LAN behind the Configuration Manager
(typically 192.168.0.x).
To activate the SysLog monitoring feature, check all desired event types to monitor and enter the last
byte of the IP address of the SysLog server. Normally, the IP address of this SysLog server is hard coded
so that the address always agrees with the entry on this page.
Figure 62 – Firewall Remote Log Screen
