Gateway Configuration Screen Definitions
SURFboard® SBG6700-AC Wireless Cable Modem Gateway • User Guide
Table 11: Advanced Options-Field Descriptions
Prevents the SBG6700-AC Web Manager or the computers
behind it from being visible to other computers on the
Enables the IPsec Pass-through protocol to be used
through the SBG6700-AC Web Manager so that a VPN
device (or software) may communicate properly with the
WAN.
Enables the Point-to-Point Tunneling Protocol (PPTP)
Pass-through protocol to be used through the SBG6700-AC
Web Manager so that a VPN device (or software) may
communicate properly with the WAN.
Management
Allows remote access to the SBG6700-AC Web Manager.
This enables you to configure the SBG6700-AC WAN by
accessing the WAN IP address at Port 8080 of the
SBG6700-AC Web Manager from anywhere on the Internet.
For example, in the Internet browser URL window, type
http://WanIPAddress:8080/ to access the
SBG6700-AC Web Manager remotely.
Allows multicast-specific traffic (denoted by a multicast
specific address) to be passed to and from the computers
on the home network (LAN) behind the SBG6700-AC Web
Manager.
Turns on the Universal Plug and Play protocol (UPnP) agent
in the SBG6700-AC Web Manager.
Select this option, if you are running a CPE (client)
application that requires UPnP.
Turn ON or OFF the various Network Address Translation
(NAT) and Application Level Gateway (ALG) status options
on your wireless network
Enter the MAC address for the computer you want to block
and click Add MAC Address button.
Repeat for up to 20 MAC addresses.
Enter the MAC address filter that you want to delete or
block, then click Remove MAC Address button.
Deletes all of your MAC Address filters.
