Intensive
(P1)
Super
(P2)
Economic
(P3)
Quick
(P4)
Prewash
(P5)
ERROR CODE
ERROR DESCRIPTION
CONTROL
Inadequate water supply
• Make sure the water input tap is totally open and
that there is no water cut.
• Close the water tap, separate the water input hose
from the tap and clean the filter at the connection
end of the hose.
• Restart your machine, contact the service if the
error resumes
Error of continuous water input • Close the tap
• Contact the service
The waste water in the machine
cannot be discharged.
• Watter discharge hose is clogged.
• The filters of your machine might be clogged
• Power off-on your machineand activate the
program cancellation command.
• In the error continues, contact the service.
Heater error
• Contact the service
Alarm is active against water
overflow
• Power off your machine and colse the tap
• Contact the service
Faulty electronic card
• Contact the service
Overheating error (temperature
in the machine is too high)
• Contact the service
Faulty heater sensor
• Contact the service
21
