© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Programming Control
F8208801
12
Table 1 (continued)
Option
Number
Option
Display
Description Default
Value
Value Range
c.
“tEnP” Fill Temperature ** “CoLd”/“Uarn”/“Hot”o r
35°F-194°F/2°C-90°C
3.
“SUPL” Supply Step ——
a.
“SUEn” Supply Step Enable/Disable ** “on”/“oFF”
b.
“dISP” Dispenser Options ** Display will show “Sx”
c.
“S1” Supply #1 ** “on”/“oFF”
d.
“S2” Supply #2 ** “on”/“oFF”
e.
“S3” Supply #3 ** “on”/“oFF”
f.
“S4” Supply #4 ** “on”/“oFF”
g.
“SdUr” Supply Duration ** Press START keypad to access
options
h.
“SEC” Seconds ** 0-59
i.
“nIn” Minutes ** 0-9
4.
“AgSt” Agitate Step ——
a.
“AgEn” Agitate Step Enable/Disable ** “on”/“oFF”
b.
“AdUr” A g i t a t e D u r a t i o n ( i n m i n u t e s ) * * 1 - 3 0 f o r a g i t a t e t y p e s 1 o r 2 ;
1-180 for agitate types 3 or 4
c.
“HEAt” Heat in Agitate (if heater is present) ** “oFF”/“1”/“2”**
5.
“drAn” Drain Step —“on”/“oFF”
6.
“SPIn” Spin Step ——
a.
“SPEn” Extract Step Enable/Disable ** “on”/“oFF”
b.
“SSEC” Extract Seconds ** 0-59
c.
“SnIn” Extract Minutes ** Intermediate Extract:
Min. Step Time = 30 seconds,
Max. Step Time = 3:59 minutes
Final Extract:
Min. Step Time = 30 seconds,
Max. Step Time = 9:59 minutes
d.
“SSPd” Extract Speed (VFD only) ** “1”-“3”*
c.
“Cnin”*** Cycle Time in Minutes (If PCtd is enabled) 0 0-255 minutes
5“bALr” Number of Balance Retries (VFD only) 3 (Design 1
and 2)
1 (Design 4)
1-7
6“IrA” IR Access (On/Off) “on”“on”/“oFF”
7“t FC” Fahrenheit/Celsius “FAHr”“FAHr”/“CEL”
8“FH” Hot Water Temperature 140°F (60°C) 35°F-194°F/2°C-90°C
9“FHC” Warm Water Temperature 100°F (38°C) 35°F-194°F/2°C-90°C
10 “FC” Cold Water Temperature 35°F (2°C) 35°F-194°F/2°C-90°C
11 “Codn” Cooldown Enable/Temperature “oFF
”“oFF” or 50°F-160°F/10°C-71°C
12 “PtEn” Production Test Cycle (On/Off) “on”“on”/“oFF”
13 “rAEn” Manual Rapid Advance (On/Off) “on”“on”/“oFF”
Table 1 (continued)
