11
To fill:
1. To fill with salt, unscrew the cap of the salt container.
2. Pour 1 litre of water inside the container
(this is necessary only before filling with salt
for the first time).
3. Using the funnel provided, pour in the salt until
the container is full.
Do not worry if water overflows from the unit
when filling with salt, this is quite normal.
4. Replace the cap making sure that there is no
trace of salt on the screw thread or on the
gasket.
5. Screw on the cap tightly.
When this has been done, all that is required is to periodically top up the container
with salt. You are reminded of this by the salt container indicator light on the
control panel which comes on when the salt has run out.
The salt indicator light on the control panel can remain illuminated for 2-6
hours after the salt has been replenished, assuming the dishwasher remains
switched on. If you are using salts that take longer to dissolve then this can
take longer. The function of the machine is not affected.
SALE
ZOUT
SALT
SALZ
SEL
SR14
Filling with special salt
Caution! The packaging of dishwasher salt and detergents are often very similar. The
accidental filling of the salt compartment with detergent would ruin the water
softener. Each time you add salt, make sure the carton you have in your hand really
is salt.
Only use salt specifically designed for use in dishwashers.
All other types of salt not specifically designed for use in a dishwasher,
especially table salt, will damage the water softener.
Only fill with salt just before starting one of the complete washing
programmes. This will prevent any grains of salt or salty water, which
may have been spilled, remaining on the bottom of the machine for
any period of time, which may cause corrosion.
The INTENSIV 65° indicator light remains off for about 5 seconds after which it
starts flashing indicating the new level selected.
5. To memorise the new level, switch off the dishwasher by pressing the On/Off
push button.
152976 15/2en-es 9-09-2003 15:14 Pagina 11
