Dil ID: 1
Dil Adı: english
Dil Kodu: en4 Eazypower Brand's Products
Dünyanın En Büyük
Elektronik Bilgi Kütüphanesi



22222
SPECIAL NOTE: e components packaged in this kit have been assembled and machined for specic type of conversions. Modications to any of the compo-
nents will void any possible warranty or return privileges. If you do not fully understand modications or changed that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. is instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specic torque values, wiring diagrams and other related equipment.
ese manual are normally available at automotive dealerships and parts stores.
Left hand transfer case.
The shift rod requires a
extension rod to provide
additional clearance.
The Atlas also requires
a speedometer housing
for the transfer case.
ADVANCE ADAPTERS, INC. P/N: 50-5710
P.O. BOX 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 2 OF 3
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 04-16-12
TOYOTA TACOMA TRANSMISSION TO
ATLAS (95-1/2 to 04 4cly Manual & Auto trans.)
retainer and is bolted on with the (6) 3/8"-16 hex head bolts. Once the adapter plate is secured and orientated correctly,
you'll now need to couple it onto the back of the stock transmission tailhousing. The stock tailhousing used two dowel
pins to align the stock transfer case to the transmission. These dowel pins must be retained into the stock tailhousing
for proper alinement of the Atlas onto the transmission. The Toyota transmissions have a short spline length on the
output shaft, since the spud shaft does not bottom out into the Atlas, this spud shaft could move back and forth on the
splines. We have included a spring that must be installed into the Atlas input. This spring will force the spud shaft to
retain full spline contact on the Toyota output shaft. Install the Atlas to the transmission and secure with the new metric
socket head fasteners.
The vehicle may require some tunnel modications for the proper t into the vehicle, and the Atlas shifter will require
some modications to t into the Tacoma.
Right hand Atlas transfer case.