VigorPro5510 Series User’s Guide
51
Before setting Static Route, user A cannot talk to user B for Router A can only forward
recognized packets to its default gateway Main Router.
Go to LAN page and click General Setup, select 1st Subnet as the RIP Protocol Control.
Then click the OK button.
Note: There are two reasons that we have to apply RIP Protocol Control on 1st Subnet.
The first is that the LAN interface can exchange RIP packets with the neighboring routers
via the 1st subnet (192.168.1.0/24). The second is that those hosts on the internal private
subnets (ex. 192.168.10.0/24) can access the Internet via the router, and continuously
exchange of IP routing information with different subnets.
1. Click the LAN - Static Route and click on the Index Number 1. Check the Enable
box. Please add a static route as shown below, which regulates all packets destined to
192.168.10.0 will be forwarded to 192.168.1.2. Click OK.
