VigorPro5510 Series User’s Guide
41
Default MAC Address – Click this radio button to use default
MAC address for the router.
Specify a MAC Address - Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
WAN IP Network
Settings
Obtain an IP address automatically – Click this button to obtain
the IP address automatically.
Specify an IP address – Click this radio button to specify some
data.
IP Address – Type the IP address.
Subnet Mask – Type the subnet mask.
D
D
e
e
t
t
a
a
i
i
l
l
s
s
P
P
a
a
g
g
e
e
f
f
o
o
r
r
P
P
P
P
P
P
To use PPP (for 3G USB Modem) as the accessing protocol of the internet, please choose
Internet Access from WAN menu. Then, select PPP mode for WAN2. The following web
page will be shown.
PPP Client Mode Click Enable to activate this mode for WAN2.
SIM PIN code Type PIN code of the SIM card that will be used to access Internet.
Modem Initial String Such value is used to initialize USB modem. Please use the default
value. If you have any question, please contact to your ISP.
APN Name APN (Access Point Name) is provided by your ISP for identifying
different access points. Simply click Apply to apply such name.
Finally, you have to click OK to save the setting.
Apply – Activate the function of identification.
Modem Dial String Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to your ISP.
PPP Username Type the PPP username (optional).
PPP Password Type the PPP password (optional).
