
General Information
38
TECHNICAL DATA
Engine
Rear mounted, liquid cooled, light alloy 90°
V6, with single overhead camshaft per bank
and cross flow cylinder heads. Fuel delivery
is accomplished with a C.I.S. (Continuous
Injection System) mechanical fuel injection,
Bosch K-Jetronic.
Cylinder bore 91 mm (3.58 in)
Stroke 73 mm (2.87 in)
Displacement 2849 cc (174 cu in)
Power rating 130 SAE NET HP
@ 5,500 RPM
Maximum Torque 208 Nm (153 ft lb)
@ 2,750 RPM
Compression Ratio 8.8:1
Note: For tune-up specifications see label
under engine compartment lid.
Cooling System
Positive pressure, closed system containing
a 50% water, 50% (Borax free) Ethylene
Glycol coolant mixture. Engine heat is
dissipated through a forward mounted
radiator equipped with twin thermostatically
controlled electric fans.
Electrical System: 12 Volt Negative
Ground
Battery Delco Remy Freedom
Capacity 75 Amp/hour
Spark Plugs Bosch HR 6 DS
(Platinum Tipped)
Spark Plug Gap 0.6 – 0.7 mm
(0.024 – 0.028 in)
Spark Plug Torque 17.20 Nm
(13 – 15 ft lbs)
Transmission
Gear Ratios
Manual – 5 speed
1st : 3.364 4th : 1.057
2nd : 2.059 5th : 0.8205
3rd : 1.381 Rev : 3.1818
Automatic – 3 Speed
1st : 2.40 3rd : 1.00
2nd : 1.48 Rev : 1.92
Final Drive – Manual and Automatic
Transaxle with double universal half shafts
Reduction Ratio – 3.44 : 1
Steering
Rack and pinion, manually operated
Wheels turns, lock to lock 2.4 turns
Turning circle 12.80 m
(42.0 ft)
Brakes
Service brakes.
Power assisted discs front and rear
Parking brake.
Mechanical, self-adjusting, acting on rear
discs.
Suspension
Front
Unequal length upper wishbone and lower
link, coil springs with telescopic shock
absorbers and stabilizer bar.
Rear
Diagonal trailing radius arms with upper
and lower links, coil springs with
telescopic shock absorbers.
Geometry
Front
Toe-in 3 mm (0.12 in) per
wheel
Caster Angle 3
1
⁄2° to 4° positive
Camber Angle 0° to 1.4° negative
(non-adjustable)
King Pin Inclination 8° + 1/2° - 0°
(non-adjustable)
Rear
Toe-in 3 mm (0.12 in) per
wheel
Camber 1/4° to 3/4° negative
(non-adjustable)